Wizord 4 Nemtek Energiser

Features

• High voltage monitor will alarm when the live wires are tampered with
• Earth wire monitor will alarm when the earth wires are tampered with
• Easy to use tag switch for controlling the unit
• Can be upgraded to a Merlin 4 energizer
• Connectable to an armed response radio
• Gate monitor input monitors the position of the gate to indicate if the gate is open
• Lightning and power surge suppression built in to reduce the possibility of damage due to power surges
• Battery backup system in case of power failure
• Intelligent power saving to extend the battery life and save energy
• Siren and strobe outputs to indicate fence condition

Specifications

High Voltage Outputs

• Typical energy output into 500 ohms load (Joules) : 3.7J
• Output voltage into an open circuit :8000V
• Number of high voltage monitored zones : 1
• Number of earth loop monitored zones : 1
• Adaptive power technology (APT), reducing false alarms and arcing on the fence : No
• Fence Interference detection from foreign energizers : Yes

Energizer Controls and Displays

• Keypads for the remote control of the energizer : No
• Tag switch – to control the energizer without using a keypad : Yes
• Remote on/off input : Yes
• Displays the output and return voltages : No
• Display type : LED

Gate and Panic Button inputs

• Timed gate switch input, used to monitor open and closing of the gate : Yes
• Panic button input : Yes

Alarm outputs

• Siren output, time programmable : Fixed
• Strobe light output to visually indicate an alarm condition : 1

Power supply and battery backup systems

• Mains supply voltage : 230V
• Typical power consumption under normal operating conditions : 18VA
• Internal battery backup system in case of power failure, capacity of battery : 7 Ah
• Typical standby time, with a fully charged battery : 36 Hours
• Solar power panels can be connected to power the energizers, (recommend Watt size for 24 hr operation) : 60 Watts
• Solar voltage regulator deep cycle battery size : 5 Amp
• Recommended in amp hours (20 % discharge over a 24 hr cycle) : 60 Ah

Wire length for both solid and stranded wires

• Galvanised wires, 1.2mm
• • Optimal performance up to : 3km
  • Maximum : 5km
• Galvanised wires, 2.0mm,2.24mm
• • Optimal performance up to : 4km
  • Maximum : 10km
• Stainless Steel 1.0mm, 304 and316 grade
• • Optimal performance up to : 0.6km
  • Maximum : 0.9km
• Stainless Steel 1.2mm, 304 and316 grade
• • Optimal performance up to : 0.7km
  • Maximum : 1km
• Stainless Steel 1.6mm, 304 and316 grade
• • Optimal performance up to : 1.4km
  • Maximum : 2km
• Stainless Steel 2.0mm, 304 and316 grade
• • Optimal performance up to : 2.1km
  • Maximum : 3km
• Aluminium Wire 1.6mm and2.0mm
• • Optimal performance up to : 8km
  • Maximum : 16km

• Can be used in multi-energizer network system : No
• IEC 60335-2-76 : Yes
• CISPR 14, EN 61000 : Yes
• Dimensions(mm) : 180x205x120